Part Number: 310 R

22 litre Fuel Tank, made from Aluminium, supplied painted black.

Fitting requires very in-depth mechanical knowledge and electrical Mounting board modification.

Special Order Item

Part Number: 380 T

Helps keep your panniers/saddlebags safe and away from the back wheel.

Note: Can be used/fitted with Yamaha Passenger backrest (have to cut pannier support spacers)

Part Number: 413 T

Pair of large saddle bags made with 600D PU, the thermoformed frontal in EVA, coated in polyester hexagonal design, increases rigidity and stability
System of rapid lock with belts with velcro and safety central belt.
Equipment:
- Rain cover
- Shoulder belt
- 2 elastic bungees with hooks
- Reinforcements in rigid plastic
- Max volume 40 litres
- Sizes: Length 530mm x Height 320mm x Width 180mm (expandable to 280mm)

Please see 'click-on' for panniers expanded.

Note: best used with Pannier support brackets #380 T

Part Number: 413 S

Pair of small saddle bags made with 600D PU, the thermoformed frontal in EVA, coated in polyester hexagonal design, increases rigidity and stability.
System of rapid lock with belts with velcro and safety central belt.
Equipment:
- Rain cover
- Shoulder belt
- 2 elastic bungees with hooks
- Reinforcements in rigid plastic
- Max volume 30 litres
- Sizes: Length 470mm x Height 290mm x Width 180mm (expandable to 280mm)

Part Number: 219T

Made from 600d pu, thermoformed side-walls in EVA coated in polyester with hexagonal texture for increased rigidity and stability.
Double-D ring fitting system with straps on the front and the side of the bag, with a central safety strap on the base, to fit under the seat or tail.
Features:
- Rain-cover
- Shoulder-bag
- Multipurpose crossed-shaped elastic straps
- Side pocket
- Upper pocket
- Additional side-inlet
- Sizes: Length 470mm x Height 300mm x Width 300mm
- Max load 4kg.

Part Number: 392 B

Satin black powder coated cast Aluminium brackets, (re-use original footrests). This is the position where the passenger footrests should have been originally placed, 6.5'' forward & lower at bottom of side panels!, to 12'' rear of rider pegs,(instead of being in the impossible foetal position at rear of panels), simple swap fitment with the original plastic covers, new screws supplied.(As with all of our cast parts these are hand proof-test fitted by us to our own bike here).

© Exactrep 2012

Part Number: 328 Ex

If you are looking for more comfort, this lower seat could do it for you. The seat height is reduced by 30mm or (1 1/4 inches) compared to the standard seat. Red stitching only for immediate exchange, grey stitch will be approx. 2 weeks.

Note 1: Exchange = You send yours here first, and the seat surface must be of original pristine condition.

Note 2: Rider seat only

With this exchange the orignal central carbon pattern is retained.

Part Number: 411

1/4" Chromed steel rack, includes 4 x bolts, rubber washers & nuts, to be used with our #324 pillion seat infil (you will need to drill your infill).

Part Number: 311 T

Satin matt black powder coated laser cut 4mm steel luggage rack, with stylish slots for 'bungee' hooks, rack size: 12"/30cm wide x 8"/20cm, supplied with 4 x bolts & black spacers, fixes to original support mounting points, (no modifications needed).

Can be used with pannier support brackets #380T and throw-over panniers.

Part Number: 365B

Practical accessory to not loose your pillion!!
Black powder coated steel. Simple fitment. Supplied with all necessary fiting kit.

A) Black Sissy Bar Only: £185.00 ($240.50) -- £222.00 Including VAT at 20%
C) Black Sissy Bar & Rack: £245.00 ($318.50) -- £294.00 Including VAT at 20%

Note: This rack can only be mounted to this sissy bar.

Part Number: 384 T

Pair of CNC Machined Billet Aluminium Pillion / Passenger Grab Bars

Available in:
A) Aluminium: £270.30 ($351.39) -- £324.36 Including VAT at 20%
B) High Temperature Black Painted: £302.18 ($392.83) -- £362.61 Including VAT at 20%

Special Order Item

Please email if you are interested in ordering this part

Part Number: 444A

CNC Machined Billet Aluminium, pillion can always hold the bars, with rack or backrest (Red or Grey stitch), with or without flashes.

Available:
A) Grab bar + Rack: £484.50 ($629.85) -- £581.40 Including VAT at 20%
B) Grab Bar + Backrest: £580.13 ($754.16) -- £696.15 Including VAT at 20%
C) Grab Bar + Rack + Flashes: £578.85 ($752.51) -- £694.62 Including VAT at 20%
D) Grab Bar + Backrest + Flashes: £665.55 ($865.22) -- £798.66 Including VAT at 20%
E) Grab Bar + Rack + Backrest + Flashes: £828.75 ($1,077.38) -- £994.50 Including VAT at 20%


Special Order Item

Please email if you are interested in ordering this part

Part Number: 444B

CNC Machined Billet Aluminium painted black, pillion can always hold the bars, with rack or backrest (Red or Grey stitch) with or without flashes.

Available:
A) Grab bar + Rack: £484.50 ($629.85) -- £581.40 Including VAT at 20%
B) Grab Bar + Backrest: £612.00 ($795.60) -- £734.40 Including VAT at 20%
C) Grab Bar + Rack + Flashes: £663.00 ($861.90) -- £795.60 Including VAT at 20%
D) Grab Bar + Backrest + Flashes: £739.50 ($961.35) -- £887.40 Including VAT at 20%
E) Grab Bar + Rack + Backrest + Flashes: £911.35 ($1,185.11) -- £1,093.95 Including VAT at 20%


Special Order Item

Please email if you are interested in ordering this part

Part Number: 379T

Stylishly smart dark tint fly screen, possibly the best looking screen so far for the 1700 Max, takes the wind off your chest.
30cm x 30cm (12" x 12")
Easy and simple to fit
All fitment kit included.

Part Number: 335 T

Touring Windshield made of tough 4.5mm clear polycarbonate and treated with the new generation Quantum Coating® to provide a long lasting, durable, protective finish. The 15-1/2 high* windshield helps provide wind protection for the upper torso and head area. Mounting hardware included.
*Height measured from top of headlight cutout to top of windshield.

Special Order Item

Part Number: 313 T

Naked New Generation is a new product line of special windscreen. NNG are made with 3mm High Impact acrylic in Dark Smoked tint.

Special Order Item

Part Number: 232 T

8 Litre capacity, 1680 Denier waterproof nylon outer shell, Map pouch with anti-glare window and Velcro closure, Heavy Duty Nylon zippers, Internal organiser pockets, Front D-Ring for additional fastening options, Removable quick release front strap harness, Adjustable rain cover, Soft touch protective internal liner, Carry handle, Removeable magnetic base, allows quick fitting / removal of bag unit, Front easy access zip pocket.