Part Number: 184 T

Bigger fuel tank 20.5 litre/5.42 US Gallon for Vmax 1200 all years, works as original, made from VEPE. Smooth,non-paintable surface. German TUV approved.

Please take the following into account:
1: The rear shock absorbers must be fully sprung and have at least the length of the original shock absorbers.
2: The rear swing arm should not be higher beneath the tank than the original swing arm. Fits with most OTEC swing-arms.
Please state what kind of swing arm you are using

Fits with all wheels up to 17" x 190 width tyre depending upon any offset.

Only modification needed is to remove approx. 30mm from the front edge of the rear mudguard (as shown on click on).

(Note: Genuine Yamaha standard tank price is £890 + VAT = £1,068.00)

Part Number: 11 T

Handcrafted Design by Exactrep.
Original style, but gives a beefier look , instantly detachable same as original dummy cover. All hand rolled steel (ie: new steel surface is formed on top of an original top cover to create fuel cavity), can be used before or after original tank has been emptied, failsafe system, complete with aerospace fuel cap, extra fuel on/off tap and all necessary kit & instructions. Supplied in bare metal/not painted.

A) on exchange basis (your dummy top cover) ie: you send yours here first. £866.67 ($1,126.67) -- £1,040.00 Including VAT at 20% © 1994 Exactrep

B) supply total tank (no exchange). £966.67 ($1,256.67) -- £1,160.00 Including VAT at 20%

Part Number: 226

Fits into the original headlight unit, or can be used with the 7" headlight conversion.

Special powerful two ball fan with 12,000RPM which accelerate the cooling rate, COB LEDs make high brightness lighting, Low voltage protection, high precision constant current driver chip, Waterproof, shockproof and long lifespan up to 100,000hrs
Easy installation: Plug & play

Specification:
Light Color: 6500K White
Wattage: 36W Each
Lumen: 4500LM Each
LED Quantity: 3 PCSLED Each Bulb
Work Voltage(V): DC9V-32V
Waterproof Rate: IP68

Part Number: 135

Made from Steel, Chrome finish.

Note: Does NOT come with lights, bracket only.

Part Number: 26 FC

The forward controls footpegs move your feet forward about 17".
Material: High Grade Billet Aluminium T6061
CNC milled Polished Silver
High temperature oxidation, not easy to fade away
Adjust your driving position,and make your driving,comfortable, reduce fatigue for long driving

Part Number: 131T

These are precision engineered forward controls for the mighty Vmax, machined from billet aluminium. All pivots are bushed, and all bolts are supplied in stainless. They are a straight swap by simply removing the original footpegs and levers, and then bolt these on. They utilize the original rear brake master cylinder, and also the splined part of the gear linkage. They are chunky and strong, and have a real smooth and precise movement.
Moves footpeg forward approx. 14" at a similar height.

Part Number: 23A

Tinted, + 2" taller than #23. Takes even more wind off your chest.
Supplied with all necessary fitting kit. Fits all 85'-07' models.

Part Number: 54

Dark Tinted Sports Fly screen, Supplied complete with fittings.

Will fit all Models, simple to fit, will also fit with Twin Headlights (see click here)

Specific for the V-max

Mounts to Indicator Bolts.



Height is 9 1/2 "
Width is 11"

Part Number: 84

Clamps to handlebars, tinted. (Not specific for the V-Max but it works).

Height 42cm, Width 38cm.


approx. + 4weeks despatch due to no stock in UK.

Part Number: 166 B

Part Number: 208T

Engine Bobbins are a stylish detailed part and well worth the extra protection they offer. CNC machined from weapon grade plastic. Each Crash Post is supplied with all the necessary compression spacers and high tensile bolts (de-embrittled) to suit.
Available in :-
Black, White, Red, Amber/Orange, Blue, Green, Gunmetal/grey

Anodised: Black, Silver, Gold, Red, Blue, Green + £10.20

Part Number: 232 T

8 Litre capacity, 1680 Denier waterproof nylon outer shell, Map pouch with anti-glare window and Velcro closure, Heavy Duty Nylon zippers, Internal organiser pockets, Front D-Ring for additional fastening options, Removable quick release front strap harness, Adjustable rain cover, Soft touch protective internal liner, Carry handle, Removeable magnetic base, allows quick fitting / removal of bag unit, Front easy access zip pocket.

Part Number: 108

Helps keep your panniers/saddlebags safe and away from the back wheel.
in Chrome.

Part Number: 413 T

Made with polyester, with thermoformed side-walls coated, for increased rigidity and stability.
All materials are developed in accordance with Reach regulations

System of rapid lock with belts with velcro and safety central belt.
Equipment:
- Rain cover
- Shoulder belt
- 2 elastic bungees with hooks
- Reinforcements in rigid plastic
- Max volume 40 litres each bag
- Sizes: Length 530mm x Height 320mm x Width 180mm (expandable to 280mm)

Please see 'click-on' for panniers expanded.

Note: best used with Pannier support brackets #108

Part Number: 413 S

Made with polyester, with thermoformed side-walls coated, for increased rigidity and stability.
All materials are developed in accordance with Reach regulations

System of rapid lock with belts with velcro and safety central belt.
Equipment:
- Rain cover
- Shoulder belt
- 2 elastic bungees with hooks
- Reinforcements in rigid plastic
- Max volume 30 litres each bag
- Sizes: Length 470mm x Height 290mm x Width 180mm (expandable to 280mm)

Part Number: 219T

Made with polyester, with thermoformed side-walls coated, for increased rigidity and stability.
All materials are developed in accordance with Reach regulations

Double D-Ring fitting system with straps on the front and the side of the bag, with a central safety strap on the base, for fitment under the seat or tail.

As standard:
- Water resistant rain cover in fluorescent material
- Shoulder strap
- Multipurpose cross-shaped elastic straps
- Side pocket
- Upper pocket
- Additional side-inlet
- Sizes: Length 470mm x Height 300mm x Width 300mm
- Max load 4kg.

Part Number: 220T

Tail Pack made from 'Gortex' type semi rain proof material, padded, converts to back pack and shoulder bag, carry handle, rain cover.

Part Number: 222T

Pair of Expanding 'Throw-over' Panniers, 'Gortex' type semi rain proof material, padded, complete as a pair with carry handles, shoulder strap, external pockets and with rain covers.
76L total.

Part Number: 67

Rider seat lowered 1.1/2" - 2", mid section "flip" with 'V-max' logo, pillion softened, all recovered in black grippy suede effect look top surfaces with 'buffalo' hide effect mid-flip and sides. Phenomenally more comfortable, or if you're just a little short in the leg. 'Exchange' only ie:-we will need yours here first !(dependant on condition of Plastic underneath and screws!, Condition of Seat covers does not matter)

NOTE: covering not similiar to original!

Part Number: 27

This is an ingenious system, (unlike the original type that's a pig to fit and weighs a ton, cost an arm & a leg, & by the time you fit it your holiday is over or the missus has gone with someone else!). Fits quickly & easily to original grab bar, modular design looks the part, nicely finished and up to the job. Can be used with or without 27C. No modifications or drilling required, no part of this system will fit with any part of original Yamaha sissy bar or rack.

A) Sissy bar with pad & rack complete (with all necessary mounting brackets): £346.50 ($450.45) -- £415.80 Including VAT at 20%
B) Sissy bar with pad only (inc. black mounting bracket.): £240.00 ($312.00) -- £288.00 Including VAT at 20%
C) Rack only (18cm x 18cm) big enough for a tent, nicley made as above. (Fits to #27B Sissy Bar support bracket): £106.50 ($138.45) -- £127.80 Including VAT at 20%
D) Rack as above, but fits on its own, without Sissy Bar (with black bracket included): £136.50 ($177.45) -- £163.80 Including VAT at 20%
E) Black Bracket Only: £30.00 ($39.00) -- £36.00 Including VAT at 20%

(note:- Rack ref part no:- 114 below, cannot be used with any of Part no:- 27 series above).
Will not fit with 'Corbin' seat (as they made the rear of base too long!)

Part Number: 44

Chromed steel. Fits to Original Yamaha 'Grab-Bar'. Good all rounder with soft back pad, re-mounts indicators lower.

note: will not fit with Genuine Yamaha Sissy Bar.

Part Number: 44S

As per #44 above, but without rack.

Part Number: 123

Chrome Rack, for use only with Original Rear Mudguard assembly.
Fits to Original Yamaha Grab bar or Can be used with our part no 27 Sissy Bar or with the Genuine Yamaha Sissy Bar / Backrest.
Not for heavy loads Max 6KG
(Note: picture taken on the 2005 V max )

Part Number: 183 A

Universal Bar-end mirrors in Black